STEINBAUER application

Hesston 9365 Swather

6.6L AGCO Power (2008)

STEINBAUER performance module for the Hesston 9365 Swather 6.6L AGCO Power (2008), designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.

Key benefits

  • Up to +25% power and torque increase, depending on application.
  • No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
  • Injection duration module developed to add performance without generic one-size-fits-all mapping.
  • Removable solution that can be removed if required.
  • Application-specific development for the individual engine and vehicle or machine application.
STEINBAUER Performance comparison
Power (BHP)
600 1,000 1,400 1,800 2,200 BHP Engine speed (RPM)
Illustrative agricultural engine-speed curve
Standard 189 BHP
STEINBAUER 236 BHP
+47 BHP
Torque (Nm)
600 1,000 1,400 1,800 2,200 Nm Engine speed (RPM)
Illustrative agricultural engine-speed curve
Standard 850 Nm
STEINBAUER 1,063 Nm
+213 Nm

STEINBAUER Technology

  • External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
  • Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
  • Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.

Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.

Vehicle specification

Vehicle details

Manufacturer
Hesston
Model
9365 Swather
Engine
6.6L AGCO Power (2008)
Displacement
6,600 cc
Steinbauer specification

STEINBAUER Module details

Part number
230103
Installation
Plug-in
Availability
Available
Engine management
Factory ECU retained
Module Warranty (3 years upon registration)
1 year
Power and torque upgrade

Hesston 9365 Swather tuning and power increase

The STEINBAUER Power Module is designed for drivers and operators looking for a Hesston 9365 Swather power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.

For this application, published performance data shows power increasing from 189 BHP to 236 BHP, with torque increasing from 850 Nm to 1,063 Nm.

If you are searching for a Hesston 9365 Swather tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.

Why choose STEINBAUER?

Intelligent performance technology

More power

Increased performance where applicable for stronger acceleration and improved working capability.

More torque

Improved pulling power throughout the usable engine speed range.

Safe and reliable

Original ECU programming and factory engine safety parameters remain active.

Removable installation

The vehicle or machine can be returned to its original factory configuration.