STEINBAUER application Application in development

Landini Technofarm 70

3.3L 1103D-33TA Tier 3

A STEINBAUER application is currently in development for the Landini Technofarm 70 3.3L 1103D-33TA Tier 3. Register your interest and STEINBAUER UK can contact you when development and final validation are complete.

Key benefits

  • Up to +25% power and torque increase, depending on application.
  • No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
  • Injection duration module developed to add performance without generic one-size-fits-all mapping.
  • Removable solution that can be removed if required.
  • Application-specific development for the individual engine and vehicle or machine application.
STEINBAUER Performance comparison
Power (BHP)
600 1,000 1,400 1,800 2,200 BHP Engine speed (RPM)
Illustrative agricultural engine-speed curve
Standard 67 BHP
STEINBAUER 84 BHP
+17 BHP

STEINBAUER Technology

  • External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
  • Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
  • Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.

Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.

Vehicle specification

Vehicle details

Manufacturer
Landini
Model
Technofarm 70
Engine
3.3L 1103D-33TA Tier 3
Displacement
3,300 cc
Steinbauer specification

STEINBAUER Module details

Part number
in prep.
Installation
To confirm
Availability
In development
Engine management
Factory ECU retained
Module Warranty (3 years upon registration)
1 year
Power and torque upgrade

Landini Technofarm 70 tuning and power increase

The STEINBAUER Power Module is designed for drivers and operators looking for a Landini Technofarm 70 power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.

For this application, published performance data shows power increasing from 67 BHP to 84 BHP.

If you are searching for a Landini Technofarm 70 tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.

Explore more

Related Landini applications

View all Technofarm 70 applications →
Part in prep. Landini 4-060 2.9L Deutz C4DT 62 Tier 4 63 → 79 BHP View application → Part in prep. Landini 4-070 2.9L Deutz C4DT 69 Tier 4 68 → 86 BHP View application → Part in prep. Landini 4-075 4.4L 1104D-44TA Tier 3 74 → 93 BHP View application → Part in prep. Landini 4-080 2.9L Deutz C4DT 74 Tier 4 75 → 94 BHP View application → Part in prep. Landini 4-090 3.6L Deutz C4DT 62 Tier 4 89 → 111 BHP View application → Part in prep. Landini 4-100 3.6L Deutz C4DT 69 Tier 4 98 → 122 BHP View application →
Why choose STEINBAUER?

Intelligent performance technology

More power

Increased performance where applicable for stronger acceleration and improved working capability.

More torque

Improved pulling power throughout the usable engine speed range.

Safe and reliable

Original ECU programming and factory engine safety parameters remain active.

Removable installation

The vehicle or machine can be returned to its original factory configuration.