STEINBAUER application

Massey Ferguson 7S.180

6.6L AGCO Power Stage V

STEINBAUER performance module for the Massey Ferguson 7S.180 6.6L AGCO Power Stage V, designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.

Key benefits

  • Up to +25% power and torque increase, depending on application.
  • No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
  • Injection duration module developed to add performance without generic one-size-fits-all mapping.
  • Removable solution that can be removed if required.
  • Application-specific development for the individual engine and vehicle or machine application.
STEINBAUER Performance comparison
Power (BHP)
600 1,000 1,400 1,800 2,200 BHP Engine speed (RPM)
Illustrative agricultural engine-speed curve
Standard 177 BHP
STEINBAUER 212 BHP
+35 BHP
Torque (Nm)
600 1,000 1,400 1,800 2,200 Nm Engine speed (RPM)
Illustrative agricultural engine-speed curve
Standard 750 Nm
STEINBAUER 900 Nm
+150 Nm

STEINBAUER Technology

  • External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
  • Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
  • Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.

Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.

Vehicle specification

Vehicle details

Manufacturer
Massey Ferguson
Model
7S.180
Engine
6.6L AGCO Power Stage V
Displacement
6,600 cc
Steinbauer specification

STEINBAUER Module details

Part number
220900
Installation
Plug-in
Availability
Available
Engine management
Factory ECU retained
Module Warranty (3 years upon registration)
1 year

Installation guides

Installation instructions for STEINBAUER part number 220900 .

Login required. Installation guides are available to registered STEINBAUER customers, dealers and administrators.
220812 / 220900 PDF installation guide · EN Login to download
Power and torque upgrade

Massey Ferguson 7S.180 tuning and power increase

The STEINBAUER Power Module is designed for drivers and operators looking for a Massey Ferguson 7S.180 power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.

For this application, published performance data shows power increasing from 177 BHP to 212 BHP, with torque increasing from 750 Nm to 900 Nm.

If you are searching for a Massey Ferguson 7S.180 tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.

Explore more

Related Massey Ferguson applications

View all 7S.180 applications →
Part 220812 Massey Ferguson 7S.180 6.6L AGCO Power Tier 4 Final 177 → 212 BHP View application → Part 220926 Massey Ferguson 1735M 1.7L Shibaura Tier 4F 36 → 44 BHP View application → Part 220926 Massey Ferguson 1740M 1.7L Shibaura Tier 4F 40 → 50 BHP View application → Part 220900 Massey Ferguson 7S.155 6.6L AGCO Power Stage V 153 → 182 BHP View application → Part 220812 Massey Ferguson 7S.155 6.6L AGCO Power Tier 4 Final 153 → 182 BHP View application → Part 220900 Massey Ferguson 7S.165 6.6L AGCO Power Stage V 162 → 194 BHP View application →
Why choose STEINBAUER?

Intelligent performance technology

More power

Increased performance where applicable for stronger acceleration and improved working capability.

More torque

Improved pulling power throughout the usable engine speed range.

Safe and reliable

Original ECU programming and factory engine safety parameters remain active.

Removable installation

The vehicle or machine can be returned to its original factory configuration.