STEINBAUER application

Mercedes-Benz Sprinter 219 CDI (2018-Current)

3.0L

STEINBAUER performance module for the Mercedes-Benz Sprinter 219 CDI (2018-Current) 3.0L, designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.

Key benefits

  • Up to +25% power and torque increase, depending on application.
  • No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
  • Injection duration module developed to add performance without generic one-size-fits-all mapping.
  • Removable solution that can be removed if required.
  • Application-specific development for the individual engine and vehicle or machine application.
STEINBAUER Performance comparison
Power (BHP)
1,000 2,000 3,000 4,000 5,000 BHP Engine speed (RPM)
Illustrative car engine-speed curve
Standard 188 BHP
STEINBAUER 225 BHP
+37 BHP
Torque (Nm)
1,000 2,000 3,000 4,000 5,000 Nm Engine speed (RPM)
Illustrative car engine-speed curve
Standard 440 Nm
STEINBAUER 528 Nm
+88 Nm

STEINBAUER Technology

  • External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
  • Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
  • Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.

Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.

Vehicle specification

Vehicle details

Manufacturer
Mercedes-Benz
Model
Sprinter 219 CDI (2018-Current)
Engine
3.0L
Displacement
2,987 cc
Steinbauer specification

STEINBAUER Module details

Part number
220864
Installation
Plug-in
Availability
Available
Engine management
Factory ECU retained
Module Warranty (3 years upon registration)
1 year
Power and torque upgrade

Mercedes-Benz Sprinter 219 CDI (2018-Current) tuning and power increase

The STEINBAUER Power Module is designed for drivers and operators looking for a Mercedes-Benz Sprinter 219 CDI (2018-Current) power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.

For this application, published performance data shows power increasing from 188 BHP to 225 BHP, with torque increasing from 440 Nm to 528 Nm.

If you are searching for a Mercedes-Benz Sprinter 219 CDI (2018-Current) tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.

Explore more

Related Mercedes-Benz applications

View all Sprinter 219 CDI (2018-Current) applications →
Part 220576 Mercedes-Benz A 160 CDI 1.5L EUR5 89 → 106 BHP View application → Part 220840 Mercedes-Benz A 160 CDI 1.5L EUR6 89 → 106 BHP View application → Part 200039 Mercedes-Benz A 160 CDI 1.7L 59 → 71 BHP View application → Part 200039 Mercedes-Benz A 160 CDI 1.7L 74 → 89 BHP View application → Part 220094 Mercedes-Benz A 160 CDI 2.0L 80 → 97 BHP View application → Part 200039 Mercedes-Benz A 170 CDI 1.7L 89 → 106 BHP View application →
Why choose STEINBAUER?

Intelligent performance technology

More power

Increased performance where applicable for stronger acceleration and improved working capability.

More torque

Improved pulling power throughout the usable engine speed range.

Safe and reliable

Original ECU programming and factory engine safety parameters remain active.

Removable installation

The vehicle or machine can be returned to its original factory configuration.